PTZ Camera

From Cinemar Wiki
Jump to: navigation, search

About

The PTZ camera can be controlled using Cinemar's MLR232SEND plugin that sends RS232 commands via the PC's com port


MLServeCmds

Here are the commands to control a PTZ Cam using the MLRS232SEND Plug-In in MLServer.

Pan Right at medium speed: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 02 20 00 23
Pan Left at medium speed : MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 04 20 00 25

Stop all actions (Pan/Tilt/Zoom/Iris etc.): MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 00 00 00 01

Tilt Down at medium speed: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 10 00 20 31

Tilt Up at medium speed: FMLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~F 01 00 08 00 20 29

Zoom in: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 20 00 00 21

Zoom Out: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 40 00 00 41

Focus FOCUS NEAR: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 01 00 00 00 02

Focus FOCUS FAR: MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 00 80 00 00 81


Zoom In and Focus Far and Iris Open MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 02 C0 00 00 C3

As above and Pan Right MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 02 C2 20 00 E5

As above and Tilt Up MLServeCmd.MLRS232Send|HEX~2~2400,n,8,1~FF 01 02 CC 20 20 0F


Just copy and past after : and it should work.


User Contributed by colhemm


Bugs

Feature Requests