MLRadioRA2

From Cinemar Wiki
Jump to: navigation, search

About

The MLRadioRA2 Plugin is used to control a Lutron RadioRA 2 Main Repeater (Model: RR-MAIN-REP-WH) via Ethernet.

Installation

MLRadioRA2.dll

Plugin that communicates with the Main Repeater via Ethernet.

With MLServer shutdown, run the MLRadioRA2_Plugin_Setup.exe. This will install MLRadioRA2 plugin to the MLServer Plugins directory. It is recommended to accept all installation defaults.


Settings

Configure the IP Address and port number for the main RadioRA2 controller. You will also have to specify the username and password for the RadioRA2 controller. The default username/password is lutron/integrator.

You must then define the RadioRA2 devices on your network or optionally you can import the file that was exported by the Lutron homeworks software.

MLServeCmds for Maestro Dimmers

On

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~On

Parameters
DeviceID = The unique device ID to control

(Literal)
MLRadioRA2|1~On

Description

Turns the specified device on.


Off

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Off

Parameters
DeviceID = The unique device ID to control

(Literal)
MLRadioRA2|1~Off

Description

Turns the specified device off.


Dim or Bright

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Dim (or Bright)~Level

Parameters
DeviceID = The unique device ID to control
Level = The level to dim to 0..100

(Literal)
MLRadioRA2|1~Dim~50
MLRadioRA2|1~Bright~87

Description

Dims or Brightens the specified device.


MLServeCmds for SeeTouch Keypads

Press

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Press~Button#

Parameters
DeviceID = The unique device ID to control
Button# = The desired button number

(Literal)
MLRadioRA2|1~Press~5

Description

Simulates a button press on the specified device.


Release

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Release~Button#

Parameters
DeviceID = The unique device ID to control
Button# = The desired button number

(Literal)
MLRadioRA2|1~Release~5

Description

Simulated a button release on the specified device.


MLServeCmds for Sivoia Shades

Raise

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Raise

Parameters
DeviceID = The unique device ID to control

(Literal)
MLRadioRA2|1~Raise

Description

Begin raising the specified device.


Lower

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Lower

Parameters
DeviceID = The unique device ID to control

(Literal)
MLRadioRA2|1~Lower

Description

Beging lowering the specified device.


Stop

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~Stop

Parameters
DeviceID = The unique device ID to control

(Literal)
MLRadioRA2|1~Stop

Description

Stops a raise or lower command on the specified device.


SetValue

{MLServeCmd}Script Usage

MLRadioRA2|DeviceID~SetValue~Level

Parameters
DeviceID = The unique device ID to control
Level = The desired shade level 0..100

(Literal)
MLRadioRA2|1~SetLevel~50

Description

Requests Shade to move to the specified level.


MLServer Variables

All the Server Variables for this plugin begin with the prefix MLRadioRA2_